This guide applies to the following watches/ variants:
- 22.01 Kyoto
- 22.01 Gilt
Winding & power reserve:
- The 22.01 is equipped with a self/automatic winding Sellita SW330.M2 movement.
- This movement has a ~40 hour power reserve when fully wound.
- If worn daily and the wearer is sufficiently active, the watch will stay wound and run indefinitely.
- If the power reserve is depleted, please hand wind the watch with 20-30 turns of the crown and give it a light shake to restart.
- Simply giving the watch a light shake and wearing it is not sufficient to bring the watch up to a full or nearly full state of wind.
Setting local and travel time:
The crown has three positions:
- The first position (pushed all the way in) is where the crown should be for wearing and to ensure water resistance. The watch can also be hand wound in this position.
- The second position (one click out) allows for the GMT hand to be set, unidirectionally. The movement continues running in this crown position, but the watch is not water resistant. When setting the GMT hand, please turn the crown crisply and precisely to ensure the hand jump a full hour increment. After setting to the desired time, back wind the crown to fully disengage the setting mechanism and push the crown back in.
- The third position (two clicks out) allows for the setting of the hour and minute hands. The movement is 'hacked' in this position and stops running, and the watch is not water resistant.
Other useful information:
- We recommend setting the main hour and minute hands before the GMT/ second timezone.
- It is normal for the GMT hands to ‘catch up’ with the hour and minute hands after being set, as there is some slack in the gearing that needs to be caught up.
- The 22.01 has a special AR coating (in order to allow us to have lume filled markers in the top crystal). If cleaned with a dry cloth, this AR coating can create static electricity and attract more dust. The best way to clean the top crystal is with a soft, clean and damp cloth.
- We use different formulations and techniques to apply lume on the dial, hands, crystal and other components, etc. This results in a slight difference in the peak brightness and length of luminsence between the two. This is normal.
- Modern luminous material requires charging to work effectively. Lume can be charged with direct exposure to bright sunlight or a strong light source such as a LED torch. The stronger the light source, the faster lume charges.